Daisy Bushing For Vw Swing Axle Transmission, Installs Between Axle Tube And Side Cover. Fits Vw Bug, Beetle, Karmann Ghia, And Early Bus With Swing Axle Transmissions. Note: Color May Vary As We Receive Black Or White Units Sold As Pair

Transmission Gasket Set For Classic Vw Bug, Ghia, Bus And Type 3 Squareback. A Must When Rebuilding Your Transmission.Application:Volkswagen Type 1 Beetle 1961 Thru 1976Volkswagen Type 1 Karmann Ghia 1961 Thru 1974Volkswagen Type 2 Bus 1961 Thru 1967Volkswagen Type 3 Squareback, Fastback, Notchback 1964...

Transmission Main Shaft Seal For All Type 1,2,3 And 4 Vw / Volkswagen

Swingaxle Tube Retainer Gasket, .015 Thickness Vw / Volkswagen Set Of 6

German Throw Out Bearing, Fits Aircooled Volkswagen Type 1 Bugs / Beetles, Karmann Ghia 1971 Thru 1979, Type 3 Squareback, Fastback, Notchback 1971 Thru 1973, Type 2 Vw Bus 1971 Thru 1979

Volkswagen Beetle Solid Transmission Mount Set For Bus Transmission Conversion, Lowers Nose Cone 10 Degrees For Use With Stock Shift Linkage.   This Kit Eliminates The Stock Mounts And Rear Stock Saddle Allowing Maximum Support With No Flex, A Must For Competition Use. Common...

Empi 17-2536 Super Transmission Mount. Bolts Securely To Transmission And Butts Up Firmly To Frame Horns.Some Transmissions May Require 4 Longer Studs For Completing Mounting Installation, 8mm x 56mm Is Recommended. Note: Only Works With Type 1 Volkswagen Transmissions From 1962 to 1979. Will...

Kennedy Pressure Plate Throw Out Bearing Center Ring With Clip For Early Vw Throw Out Bearing Up To 1970, Replacement Ring & Spiro Clip Easy To Install. Convert 200mm / 8 Inch Kennedy Clutches

Empi 32-1208-B Heavy Duty Spring Loaded Super Throw Out Bearing Clips.   Application: Volkswagen Type 1 Bug 1949 Thru 1970 Volkswagen Type 1 Karmann Ghia 1956 Thru 1970 Volkswagen Type 2 Bus 52 Thru 1970 Volkswagen Type 3 Squareback, Fastback, Notchback 1964 Thru 1970...

Empi 18-1045 Volkswagen Throw Out Bearing Shaft Bushing Kit. Heavy Duty 16mm Bronze Bushing Replacement. Stock Cross Shaft Bushings Flex And Sometimes Do Not Fit Correctly. Bronze Bushings Are Recommended When Installing A high Performance Pressure Plate.   Specs: 23mm O.D. 16mm I.D.  ...

German Throw Out Bearing, Fits Aircooled Volkswagen Type 1 Bugs / Beetles, Karmann Ghia 1958 Thru 1970, Type 3 Squareback, Fastback, Notchback 1964 Thru 1970, Type 2 Vw Bus 1952 Thru 1970

Empi 9540 Red Urethane Transmission Mount Kit For Type 1 Vw Bug 1961-1972. Made From Injection Molded Urethane, These Mounts Reduce Flexing Without The Noise Of Solid Steel Mounts. Complete With Front Nose Cone Mount And Both Cradle Mounts. Includes All Necessary Hardware For Easy...

Empi 98-1088-B Volkswagen Throw Out Bearing Cross Shaft Bushing Kit. Worn Out Cross Shaft Bushings Do Not Allow The Throw Out Bearing Cross Shaft Full Engagement Resulting In Gear Grind And Hard Shifts.   Specs: 16mm O.D. 14mm I.D.   Includes: Rubber Bushings Bronze...

Vw Bug Solid Transmission Mounts With Support Straps. Includes Front Nose Cone Mount, Rear Cradle Saddle Mount, Center Core Strap, Rear Bell Housing Strap And Hardware. This Kit Eliminates The Stock Mounts And Rear Stock Saddle Allowing Maximum Support With No Flex, A Must...

Vw Bug Transmission Strap To Frame Horn Bolt And Washer Kit.Includes:Qty 2 Frame Horn BoltsQty 2 Frame Horn Washers Sold As Set Of 4

Empi 18-1053 Volkswagen Throw Out Bearing Shaft Bushing Kit. Heavy Duty 20mm Bronze Bushing Replacement. Stock Cross Shaft Bushings Flex And Sometimes Do Not Fit Correctly. Bronze Bushings Are Recommended When Installing A high Performance Pressure Plate.   Specs: 23mm O.D. 20mm I.D.  ...

Empi Poly Urethane CV Flange Plug Seals For Vw Type 2 BusThese Special Poly Urethane Drive Flange Plugs Fit Into The CV Joint Flanges To Seal And Prevent The Axles From Tapping The Transmission. Tough Urethane Will Not Tear Or Flatten Like Stock Seals.Poly...

Weld In Transmission Mid Mount. Ideal Trans Support Mount When Utilizing A Vw Bus Transmission Into A Steel Tube Dune Buggy Or Sandrail Chassis. Application: Volkswagen Type 2 Bus 002 And 091 Transmissions

EMPI 3195 Volkswagen Beetle Solid Transmission Mount Set For Bus Transmission Conversion This Bolt On Kit Eliminates The Stock Mounts And Rear Stock Saddle Allowing Maximum Support With No Flex, A Must For Competition Use. For Use With Volkswagen Bug, Karmann Ghia, Early Type...

Empi 5302-K Classic Volkswagen Clutch Disc Alignment Tool. Important Tool For Perfect Clutch Disc Alignment To Assure Easy Engine Installation. Engine Installation Could Be Very Difficult Or Impossible Without Proper Clutch Disc Alignment. Application:Type 1 Vw Bug/Beetle 1949 Thru 1979Type 1 Vw Karmann Ghia...

Kennedy Stage 1 Pressure Plate, 1700Lbs, For 200mm (8 Inch) Volkswagen. Ideal For High Performance Applications. Street, Drag Strip, Off-road. Application: Volkswagen Type 1 Bug / Beetle 1967 Thru 1979 Volkswagen Type 1 Karmann Ghia 1967 Thru 1974 Volkswagen Type 3 Squareback, Fastback, Notchback...

Side Cover Seal For Type 1 Irs, Seals Behind The C.V. Drive Flange And The Transmission Side Cover, Each

Vw Bug Nose Cone Bushing Repair Kit. This Replaces Both The Seal And The Brass Bushing In The Trans-Axle Nose Cone.Includes:Rubber SealBrass Outer Seal Holder Application:Volkswagen Type 1 1961 Thru 1977Volkswagen Type 2 1961 Thru 1967Volkswagen Karmann Ghia 1961 Thru 1974Volkswagen Type 3 Squareback, Fastback,...

Rear Transmission Mount For Classic Vw Bug, Ghia, Bus, Type 3 Squareback, Thing.Application:Volkswagen Type 1 Bug 1949 Thru 1972Volkswagen Type 1 Super Beetle 1971 Thru 1972Volkswagen Type 1 Karmann Ghia 1956 Thru 1972Volkswagen Type 2 Bus 1950 Thru 1967Volkswagen Type 3 Squareback, Fastback, Notchback...

Empi 32-1205-B Throw Out Bearing, Fits Aircooled Volkswagen Type 1 Bugs / Beetles, Karmann Ghia 1958 Thru 1970, Type 3 Squareback, Fastback, Notchback 1964 Thru 1970, Type 2 Vw Bus 1952 Thru 1970

17 Tooth Axle End Gears For Vw Swing Axle Type 1 Transmissions. These Gears Will Only Match With 11 Tooth Spider Gears. Factory Application Would Be Type 1 Up To 1972-1/2Note: Does Not Fit Type 2 Vw Bus Diffs Sold As Pair

Clutch Cable Arm, Forged Heavy Duty For Type 1 1961-1971 And 002 Transmissions

Empi B4-0902-0 Clutch Installation Kit For Classic Vw Bug, Ghia, Bus, Squareback. Includes: Qty 6 Grade 8.8 Zinc Plated Bolts 8mm Qty 6 Wave Washers 8mm

Empi 32-1204 Clutch Installation Kit For Classic Vw Bug, Ghia, Bus, Squareback. Includes: Qty 6 Grade 10.9 Zinc Plated Bolts 8mm Qty 6 Wave Washers 8mm Qty 1 Pilot Tool (Vw Spline)

Kennedy Stage 2 Pressure Plate, 2100Lbs, For 200mm (8 Inch) Volkswagen. Ideal For High Performance Applications. Street, Drag Strip, Off-road. Application: Volkswagen Type 1 Bug / Beetle 1967 Thru 1979 Volkswagen Type 1 Karmann Ghia 1967 Thru 1974 Volkswagen Type 3 Squareback, Fastback, Notchback...

VW Bug & Bus Engine To Trans Bolt Kit. 002 Vw Bus 1963-71, Vw Beetle 1950-79Includes:1 - Half Moon Starter Bolt 10mm x 110mm1 - 10mm x 70mm Late Style Engine Bolt4 - 10mm Nylock Nuts2 - 10mm x 85mm StudsApplication:Volkswagen Type 1 Beetle 1967-1979Volkswagen...

Transmission Nose Cone For Classic Volkswagen Type 1 Bug, Ghia, Type 3 With Synchromesh Transmission.Application:Volkswagen Type 1 Bug 1961 Thru 1972Volkswagen Type 1 Super Beetle 1971 Thru 1972Volkswagen Type 1 Karmann Ghia 1966 Thru 1972Volkswagen Type 3 Squareback, Fastback, Notchback 1964 Thru 1972

Empi 00-9551 Engine Mount Bolt KitIncludes:1 - Half Moon Starter Bolt1 - 10mm x 70mm Late Style Engine Bolt3 - 10mm Nuts Application:Air-cooled Beetle, Ghia, And Type 3 Engines, All YearsSold As Set Of 5

Transmission Nose Cone Seal, All Years Vw / Volkswagen

Transmission Nose Cone For Classic Volkswagen Type 2 Bus Transporter 1961 Thru 1967 With Synchromesh Transmission. Use With Hockey Stick AC301112B (113311541) Only.Note: Also Used To Adapt 1961 Thru 1967 Synchromesh Bug Transmission Into 1960 And Earlier Bug With Crash Box Style Trans. 

Heavy Duty Daikin Semi Metalic Woven 8 Inch / 200mm Rigid Clutch Disc With Vw Spline Center Pilot Hole. Application For All Air-cooled Volkswagen Bug, Ghia, Bus, Dune Buggies And Sandrails Using Single Disc 8 Inch Pressure Plates And Flywheels.

Transmission Nose Cone Gasket For Classic Vw Bug, Ghia, Bus And Type 3 Squareback. A Must When Rebuilding Your Transmission. Application:Volkswagen Type 1 Beetle 1961 Thru 1976Volkswagen Type 1 Karmann Ghia 1961 Thru 1974Volkswagen Type 2 Bus 1961 Thru 1967Volkswagen Type 3 Squareback, Fastback, Notchback...

Empi 17-2828 Vw Bug Transmission Strap To Frame Horn "Bolt", Each

Empi 98-2011 Volkswagen Throw Out Bearing Racing Cross Shaft. Compared To A Stock Shaft With Small Tack Welds The Vertical Arms On This Hd Shaft Are Welded Continuously Around The Horizontal Shaft. When Installing A High Performance Pressure Plate It Is Recommended That You...

Empi 9542 Deluxe Vw Bug Front Steel Transmission Support Kit, For Use With OEM Or Urethane Mounts. This Allows Maximum Support With Little Flex, Rubber Insulation Reduces Noise. Using Urethane Mounts Help Prevent Wheel Hop Which May Cause Transmission Or Other Component Damage, A...

Empi 32-1257-B Complete 200mm (8 inch) Clutch Kit With Sachs Pressure PlateEverything You Need To Replace Your Clutch In One Handy Kit. Kit Includes New Brazil Sachs Pressure Plate, Standard Disc, Standard Throw Out Bearing With Clips, And Clutch Alignment Tool.Application: For All Air-cooled...

Empi Poly Urethane CV Flange Plug Seals For Vw Type 1 BugThese Special Poly Urethane Drive Flange Plugs Fit Into The CV Joint Flanges To Seal And Prevent The Axles From Tapping The Transmission. Tough Urethane Will Not Tear Or Flatten Like Stock Seals....

Release Bearing Guide Sleeve Type 1 1971 Thru 1979, Ghia 1971 Thru 1974, Bus 1971 Thru 1979, Type 3 1971 Thru 1973 Vw / Volkswagen

Freeway Flyer Volkswagen Pro Street Swing Axle Transmission 1962 Thru 1968, 12 Volt 4 Speed Manual Gear Box. Vehicles Older Than 1961 May Require Mounting Modifications. This Transmission Is Built With A 412 Ring & Pinion, .82 4Th Gear Which Gives A Little More...

Empi 32-1258-B Complete 200mm (8 inch) Clutch Kit With Sachs Pressure PlateEverything You Need To Replace Your Clutch In One Handy Kit. Kit Includes New Brazil Sachs Pressure Plate, Standard Disc, Standard Throw Out Bearing With Clips, And Clutch Alignment Tool.Application: For All Air-cooled...

Vw Clutch Kit With Stage 1 Kennedy 8 / 200mm Pressure Plate, Daikin Clutch Disc, And Sachs Throw Out Bearing Application For Volkswagen Type 1 Bug And Ghia Up To 1970, Type 2 Early Bus Up To 1970, All Dune Buggies And Sandrails Using...

Nose Cone To Chassis Rubber Boot Seal, Type 1 1961 Thru 1979, Ghia 1961 Thru 1974, Type 3 1964 Thru 1973, Each Vw / Volkswagen

Transmission Dust Shield, Type 1 61-71, Type 2 68-75

Empi 9530 Vw Bug Solid Transmission Mounts. Includes Front Nose Cone Mount, Rear Cradle Saddle Mount. This Kit Eliminates The Stock Mounts And Rear Stock Saddle Allowing Maximum Support With No Flex, A Must For Competition Use. Application For Volkswagen Type 1 Transmissions With...

Snap Ring Only For Type 1 Swing Axle Super Diffs, Each